Chosen Solution So I’m trying to save my data off my ipod. I bought a enclosure to put my ipod hardrive into. Plugged it in and it shows up in devices as a Toshiba 2.0. But it doesn’t show anything on the device. if I pull the hardrive back out and put it back in the ipod it will show all the music on the ipod-only if plugged into the wall socket....
Chosen Solution Hey everyone, Im trying to figure out what is causing this issue. The IPad stucks in a black screen, showing the battery icon (without the power cord) when I press the button to turn it on. This all happened after a screen replacement. I thought it could be the battery connector (which was replaced) causing the IPad to not charge, but it seems to be fine. I checked the resistance between each pin of the connector and the logic board and theyre all below 1 Ohm....
Chosen Solution My iPad ran down to 5% battery. When I tried to charge using the Apple iPad charger and cable it wiil not charge. Tried a number of variations of cable and chargers, still will not charge. You really need an inline USB-C power meter to see what is happening. It could be just a bad connector or something deeper.
Chosen Solution I replaced the battery in my iphone, but now the camera is not working. How can I make sure the camera is correctly connected when reassembling the motherboard? The connector that connects the logic board to the camera. Check it is all the way in. Basically, follow this in reverse
Chosen Solution I have an iphone 4s att on ios 7.0.4 and the wifi is having problems it grays out on and off and wont connect or read and connections around. i have restored, reset network settings and and changed the part. none of this has worked. I’ve tried everything. is this a fixable or will the phone need to be replaced You probably have a logic board issue. With a logic board problem, you should replace it....
Chosen Solution iphone 5c proximity sensor not working after i replaced the screen. it’s in place but do i need to put something else on it? I won’t make sure that you didn’t accidentally tear the cable also does the new screen have a hold for the prox sensor? no the sharpie will not work this was a tip only for the iphone 4 its possible you damaged it.. is the rubber gasket still on the prox
Chosen Solution I’m working on an ip6 that has had one LCI triggered next to the sim slot. Anyways it is not reading any sims, the slot doesn’t look damaged. ideas? I’m stuck on the activation page. Anyway to activate it without a sim? You Can always connect it to itunes as long as the sim is on the iphone to bypass activation You can try another SIM card. If it still not work, that’s the problem of your phone....
Chosen Solution So I purchased an OEM grade replacement digitizer/lcd combination from a reputable supplier. Once I installed the new screen and powered on the device I noticed LCD discoloration where the rectangular silver block is on the two ribbon cables. It seems to me that the block is too thick as if it’s putting pressure on the lcd from the backside. Anyone ever ran into this issue? Hi, Thicker blocks are usually only on copy displays....
Chosen Solution My S8 Plus screen just went black today. Didn’t drop it, damage it in any way. Warranty expired in June so I can’t get a new one. Wondering if its easy to fix the LCD or just get a new phone…that won’t be cheap. I’ll let you decide this for yourself. I personally have no experience with this device so I have no idea if it’s easy to replace the screen....
Chosen Solution Hi all, I want to buy a Macbook soon and I found out it’s much cheaper for me to buy it from Germany. The problem is they use a QWERTZ keyboard layout there and I’m used to QWERTY. I was wondering if it’s possible to change the keyboard layout from QWERTZ to QWERTY myself, I only have to move the Z and the Y keys. And if I’m correct I can just change the layout in the Macbook’s settings?...
Chosen Solution Put in start up disc with no response on screen but I can hear action inside. ??? Yet it remains blue You need a new hard drive. I would recommend a solid state drive. They are 10x faster and save electricity! they are more expensive than a regular HD though so you decide. any other drive would work. If you’re hearing noises thats really bad. you would need to somehow pull up disk utility and repair disk…
Chosen Solution i can not clone my drive because of a broken seal thanks aaron Makes total sense! Back in the day we often used cloning as it was faster, as long as there isn’t any corruption and one it going between the same drive (the early sector type of cloning), then people wanted to jump to bigger drives which sector based cloning failed so Block cloning came out that let us migrate to larger drives....
Chosen Solution I just replaced the screen on my iPhone 6S Plus and everything worked fine. Then Apple started hitting me with those annoying upgrade messages that you can’t say no to… just postpone. So I allowed the upgrade to ios 11.1 (something). After the upgrade my keypad became erratic but only on text messaging (Murphy right?). Apple claims the problem is being caused by a third party screen but my phone worked fine before the upgrade to 11....
Chosen Solution Today I was at my work and I had gotten a bunch of notifications but I didn’t hear them. So I put on my ear buds and I still didn’t hear them. I can’t hear any notifications from my text message app or my other apps. I checked my settings and all of my sound is on and my notification settings look good. Still not working? My phone vibrates but no sound?...
Chosen Solution I’ve tried everything, the SIM card tray remover, a paper clip, and it just won’t come out. It seems as every time I put something in that hole I end up poking something inside of the phone i got it out with brute force
Chosen Solution if i install a bigger ram,will i be able to download stuff? I’m not sure here, but is BOSS not confusing hard drive storage and RAM? That really depends on the size of your ram. If you assume a typical ram to be between 45-160 KG, then I think you could get an extra 200-300 GB of storage. However, you’d need to check that your motherboard has the capacity to take the extra ram....
Chosen Solution My galaxy has broken screen as well as damaged motherboard will replacing motherboard reset my IMEI no? will I have to reload Android OS?If yes how please help If you replace the motherboard then EVERYTHING will be lost. To be honest unless you can source a really cheap motherboard and screen then it is probably not worth the cost as a new phone would be a lot cheaper.
Chosen Solution how do you remove internal dust in camrea and zoom lenses @desertguy use the self cleaning function on your camera for the sensor. Follow the instructions on here If you cannot remove dirt or dust on the image sensor (CMOS) even by using the sensor cleaning function on your camera, or if your camera does not have a function for sensor cleaning, you can clean the sensor on your own by using a commercially available blower....
Chosen Solution I bought an iPhone 12 yesterday for $80 that was bootlooping or stuck in recovery mode. I Tried all the normal steps at least 50 times. Then I started to take it apart and look inside and disconnect the battery. I was pretty desperate at this point so just for the heck of it I plugged it to my computer with no screen and a meter so I could somewhat tell what was going on....
Chosen Solution Today I have (mostly) successfully replaced my broken screen on the iPhone 6s plus. Everything works except for the back (main) camera, It’s not focusing. I think it might be because I might have been using excess isopropyl alcohol to clean the old adhesive. I have removed the camera, tried to clean it and put it back but for the moment it’s not focusing well. How can I clean this camera?...
