Chosen Solution Hello iam using samunsg j2pro 2016 phone my phone charging lately and draining fast please help me to solve my problem please any one. Hi, Have you got WiFi, Bluetooth and GPS permanently enabled? They all use a lot of power. Disable them if you don’t need to use them all the time and see if the battery lasts longer. Try starting the phone in safe mode and check if the battery performance noticeably improves or not....
Chosen Solution My kenmore oven does not work 1 control panel model 790.36683500 Hi, Do you mean error code F1? If so here is what to do to if disconnecting the power from the range for 30 seconds and then reconnecting the power, doesn’t clear the code allowing the oven to work. The location of the oven temperature sensor is shown as part #37 in the Body parts diagram. There is also a wiring diagram which may help as well....
Chosen Solution how to reset it has no back button only a rest at the back there is no hard reset for that tablet. here is the link to flash it instead. https://www.youtube.com/watch?v=MYrfbb6N… here’s your firmware https://www.youtube.com/watch?v=MYrfbb6N…
Chosen Solution A couple of weeks, a day after I did a software update i started having no service. Things i’ve done: -Went to t mobile and they check sim and network settings and the said those were fine. -I swapped sim cards my self and it still didnt work. -Called apple support and after a whole day of BS from them they said I need to go to apple store....
Chosen Solution I smashed my iPhone 6 Plus a couple of days ago and the screen was already broken. I tried charging it for an entire day non-stop but the phone still wouldn’t turn on and when I tried plugging it into my laptop, iTunes wouldn’t respond to the phone. Could it be dead with no hope of it getting fixed? Or does it mean I need to get my logic board replaced?...
Chosen Solution Hi All, So a few months ago laptop started giving me RAM Issue beeps. So I replaced the RAM, which didn’t seem to fix the problem. In fact it seems to have gotten worse. When the computer is running it easily reads all 16GB of RAM until I hold it. Then it freezes and starts giving me the RAM Issue beeps. I’m on my 3rd set of NEW ram and it’s doing the same thing....
Chosen Solution After I opened it to replace the HDD I got vertical lines, after return from an authorized Apple they return even more problematic, they said that the LCD was damaged, but I just open as I do always, I thought that is the cable/connector. Has anybody pass thought the same problem? Update Here the screen photo Sadly, yes! The newer ‘Thin Series’ systems are much harder to open without damaging the LCD panel....
Chosen Solution My iMac doesn’t turn on. On the logic board is only the first 1 Diagnostic LED turned on. No chime, no fans, no hdd. The power Button is okey. What i find is: The 4st PIN on power supply output connector shows 12,05V The 6st PIN on power supply output connector shows 4,95V The 1st PIN of J600 shows 12,05V The PIN 2 and PIN 3 shows 0 - 0,2V PIN 4 of power supply output connector is railed to PIN 2 and 3 of J600 but they doesn’t have 12,05V It is correct?...
Chosen Solution I just replaced my bloated old factory battery with a new iFixit replacement battery, but my computer is still saying Battery Service Recommended. I have tried both the battery calibration steps and an SMC reset (though i’m not sure I found the exact steps for my model) and it still hasn’t gone away, is there another way to reset it? If not, will that affect the performance of my computer?...
Chosen Solution How can I change or replace the battery? Are you sure its a battery issue? Does the device show its charging when you plug in a charger? The battery is behind the LCD. You would have to remove the glass screen, and then the LCD and you will see the battery. After removing both the glass and LCD its easy to access the battery. What will take time is the adhesive around the glass....
Chosen Solution I first tried connecting a new screen to replace the cracked screen and it didn’t work. I thought maybe the screen i got was bad so I tried the cracked screen again, that didn’t work. Same as the last time black screen, no sound or vibration unless you plug in the charger. So I reconnect the new screen again figuring if I’m going to get this to work it might as well be with the new screen....
Chosen Solution I changed my screen. Now when i want to turn it on it gets into the white screen for about 5 seconds and turns off. Is it in a boot loop or is it booting to a black screen that is lit up? It might be that your phone is stuck in DFU mode meaning it would have to either be restored or updated.
Chosen Solution I’m just wondering if it’s possible to update the CPU on this laptop. Laptops of this era are a hit-or-miss when it comes to CPU upgradability, so if they have a socketed CPU, it often only allows a narrow degree of upgrade, mainly due to their heatsinks, which can’t be upgraded. However, the general rule of thumb in my books are:-ALL MacBooks don’t have easily upgradable CPUs, as they are soldered -Most windows laptops (circa 2004-2011) that that screens bigger that 13” have socketed chips, and can be upgraded...
Chosen Solution I’m wondering why the Magic Keyboard for iPad Pro has a mechanical button under it rather than the force sensing hardware and haptic feedback found in MacBooks and the Magic Trackpad. Is it because it’s thinner? People here may not knows Apple’s reasoning, but they might know which technical solution takes up the most space. I think it has to do with the haptics parts would be too thick....
Chosen Solution I recently replaced my iPhone’s Screen and motherboard. It went perfectly well. Everything works thankfully. However, I noticed that the touch ID doesn’t work. After reading online, I’ve read that apparently the touch ID is made for a specific IMEI. So if the touch ID doesn’t match with what’s in the IMEI, it won’t work. But then I see other people say that they’ve succeeded in replacing the screen with an entirely new home button and have had the touch ID work....
Chosen Solution The original GPUs in these 2010 iMacs are known to fail. I’m fully expecting mine to fail eventually. Today I noticed that I get this blocky effect on mouse drags after the computer has been on for a full day. I also saw this today (see image). Are these signs of a GPU starting to fail? You might be able to save it! I’m suspecting the GPU board overheating....
Chosen Solution My 5 year old Kenmore washer model 110.27102310 has started making a very loud noise during the spin cycle. The noise becomes louder at high spin speeds and sounds similar to that of an aircraft with a propeller. Would this sound be caused by the drum bearing going bad or another component? Thank you, Dave If your Kenmore 110 Series Washing Machine is making strange noises, see the Kenmore 110 Series Washing Machine Makes Unusual Noises problem page for possible causes and solutions....
Chosen Solution I have a Miix (not one of the options offered on the menu of getting to this page.) Everytime I click my mouse (whether external or touchpad), my virtual keyboard pops up on the screen. Very frustrating and time consuming as I have to close it each time before proceeding as it often covers the area i’m working on. I went to all of the settings areas related to keyboard, display, etc....
Chosen Solution Hello there, My poor old faithful 2012 MBP has been needing a lot of TLC recently, (HDD failure, Mag-Safe needed replaced, Fan replaced) and I’ve done all of the repairs myself. I’ve damaged the retention clip that holds the keyboard ribbon cable and as a result have been experiencing intermittent dropouts in keyboard function and backlight. If I shake the machine gently it usually regains full function until the machine is moved again and I’ve had to re-seat the cable twice now which was extremely tricky....
Chosen Solution I have a Westinghouse model RT1936 It leaks water inside the refrigerator. It accumulates under the vegetable crisper drawers. Clogged or Freezing Defrost Drain If the refrigerator is leaking water it’s possible that the refrigerator has a clogged or freezing defrost drain. If the defrost drain freezes the defrost water will overflow the drain and drip down to the bottom of the compartment, If enough water accumulates in the bottom it can run out onto the floor....
