Chosen Solution Hello, my iphone has got a water damage. only the upper parts. first of all, i switched it off and denn after 2h i switched on and it was ok. after 3 hours the screen has started to flicker. so i switched off and put it in rice for 2 days. i was not lucky because the screen got worse and then i opened it and cleaned the logic board with alcohol 99,5%....
Chosen Solution I have an iPhone 5s that I changed the screen and battery, it was charging originally after repairs but then it stopped charging, could it be the pins on the logic board were bent since I had not sealed the device yet? The display is a Ifixit display and the battery is a scanditech, please help! Do a thorough visual inspection, preferably with magnification, of the area surrounding the battery connector....
Chosen Solution Hi everyone I recently had to change the screen of an iphone XR very damaged, and after the screen replacement the display doesn’t work but the phone turns on, it vibrates and sounds, and more, the tactile works (I can hear the keys sound when I touch the screen). I can’t figure out what is the problem. I’ve spent many hours looking for informations about that on internet but nothing… I never faced such a problem while repairing iphones....
Chosen Solution I replaced the screen and made sure I did not have any ribbon cables in the way of the emi shield but the screen just slightly pops up on 1 side? does it have something to do with that metal plate? here are pics http://i485.photobucket.com/albums/rr220… http://i485.photobucket.com/albums/rr220… PREP,PREP,PREP!!! iPod 4 screen replacement is all about the surface preparation before the new screen is installed. Make sure the digitizer cable is folded the correct way....
Chosen Solution Hello. Is it possible to unlock an iphone 6 so that I can use it with any service provider? I have heard mixed results to this question. If it is possible do you do it? What carrier is the phone currently on? and what model, you say iPhone 6 but you picked iPhone 6S, which one?
Chosen Solution I have an iMac Retina 5K, 27“, 2019 with a 3.7GHz i5 (and a Radeon 580X with 8GB of memory). I‘ll be upgrading it‘s internal hard drives soon. When the iMac is open I could upgrade the CPU to an i9-9900k. But is it ok? Is the cooling sufficient for the i9? Does the main board deliver enough power? I saw a video on youtube but that doesn‘t imply that it‘s ok....
Chosen Solution Hi all! I have a tablet that is showing no sign of life whatsoever. Nothing happened to it, seemingly the battery just died while connected to a computer that went to hibernate, and the next day no way to turn the tablet back on. All in all, I’m figuring it might just be the USB connector, which I’m hoping for because they are quite easy to find on ebay and such (which is also why I’m suspecting this may just be a common fault on those tablets)....
Chosen Solution I upgraded the RAM. Had an issue with the new RAM causing the three beeps I think it was because I did not seat the RAM correctly after reinstalling it I rebooted the iMac and the display showed this: https://imgur.com/a/qUm4x4U It is a moving static waving like antenna TV’s did before digital was implemented. Update (05/27/2018) I tried the old RAM to no avail. I also tried just one stick of the original and new one....
Chosen Solution I just bought these shoes used because this brand in a 10 M fits me without trying it on first. Also for financial reasons it was cheap. Is the toe leather torn partly because the insole was just a little long putting pressure from inside on the toe? Obviously they scuffed the toe which caused it to tear through, but, to repair this toe, do I need to first remove the insole and shave a little off the toe?...
Chosen Solution I accidentally injected two discs and then I was not able to get them out. I did something stupid and stuck a kitchen knife to try to get them out… Is this item dead now? thanks. j Not necessarily. Open it up, remove the disks and see how much damage you did. Here’s how to do it: Apple USB SuperDrive Optical Drive Replacement
Chosen Solution Hey, is there any way to see if the homebutton is original? Got one that dosent work but i dont know if they replaced it before so it dosent work because of that. I also got one that I do know is original. Components looks the same, the qr code dosent. and numbers on the flex is: 821-00912-02 MFC3116 dont know if that one is original. The one I know is original says: 821-009 MK12-02....
Chosen Solution My screen cracked the first day after replacing it. i have a case with a built in screen protector and a extra glass screen protector. The only way it could have cracked is on my pocket. Is this covered under any of the warranties? I presume you had this repaired at an independent repair shop. I can’t speak for the shop you went to but generally speaking, replacement screens are not covered for physical damage (i....
Chosen Solution I dropped my Iphone 6 on the floor and it still restarting It sounds like the board may have been damaged due to the drop. I would try opening the phone and looking for anything that doesn’t look right, cables amiss, stuff like that. If nothing looks wrong it could be board damage. Hope this helps!
Chosen Solution Bought this used unit and found out that it is not putting out cold air. What is best to troubleshoot to determine if it is the compressor or a coolant issue? Hi @mrdave2066 , Is the compressor motor running? If not it may be a faulty start relay, part #15 unit parts diagram or a faulty capacitor (part #19 - unit parts diagram)] If the compressor is running check that the evaporator fan is running....
Chosen Solution I have lines through the screen that are there when first turned on but after about 20 minutes they go away. what is the issue? Sounds like the screen is going bad. How old is the TV? If its less than a year old contact Samsung about it. If its more than a year old you could still try to contact them however they may not help you, which means you would have to get a new TV....
Chosen Solution i have problem with canon mf4412 it showing the error “100-0001” so please help me @kiranmahale check this Show massage on display " E100-0001"
Chosen Solution which is for Samsung s7 edge FD Lcd, I can’t find it, thanks. @vincent87 you can use SM-G935F displays on FD variants. The difference from FD and F is dual sim vs. single sim. These SM-G935F G935A G935V 935T should all work for your phone. Pick a supplier of your choice for the display and use this guide Samsung Galaxy S7 Edge Display Assembly Replacement to repair it.
Chosen Solution i want to get touchpad replacement because mine is crack Hi, You may be out of luck. Looking at the hardware maintenance manual for the laptop, the touchscreen is integrated with the LCD panel. It cannot be individually replaced. Go to p.42 to view the necessary pre-requisite steps and then the procedure to remove the LCD panel The part number for a complete display assembly i.e. touchscreen + LCD panel is 5D10S39587....
Chosen Solution I wanted to replace its keyboard but the technical guy said that it’s body has been damaged and it needs to changed. So I am unable to find any body. Please help! Here’s where eBay may really be your friend, do a search for case & Samsung NP300E5C-A09US
Chosen Solution I have replaced the power supply and the inverter board but still can’t get it t come on. It powers up, the led light is on and after a min the fan gets really loud. Any help will do? Just trying to get it up and running, its a cool retro computer and would love to get it working. Thats not good ;-{ Your logic board has an issue....
