Chosen Solution Hello. My younger brothers phone fell of the back of my truck after he had left it on there. It landed on the road. It was left outside on the road for a few days before being found by a neighbor. It had been in contact with water. iPhone shuts off randomly every few minutes. Also phone says searching for data and the cellular data does not work and it says Cellular update failed....
Chosen Solution Attached is a photo of the replacement screen I ordered and it appears to me to be torn. Is the circled portion of the connector supposed to look like that or has it been ripped? That looks different compared to mine, but I get mine from a different supplier. If it’s an ifixit screen, call them up and ask about it.
Chosen Solution I can’t seem to get JC Pro 1000s to read a nand from an iPhone 5. The first attempt it kept sticking at 97% read and say failed. After updating JC and reballing the nand it’s just saying failed and seems worse. Any suggestions? You should try with the NAND clean and without solder balls. Solder balls could cause the pogo pins to slip and lose contact. Is this specific to this NAND only or has it not worked for any NAND, past or present?...
Chosen Solution No matter what I do it isn’t possible to adjust the screen brightness on my computer. You need to find the VAIO Control Center and go to Image Quality controls. Then look for an on/off button for the feature and turn it off. The VAIO Control Center can be accessed from the start button on the Home Screen or search for VAIO Control Center and you should find it....
Chosen Solution I can use my iPhone for recording voice notes, videos, shazam, calling with the phone in my ear, record voice messages in WhatsApp but when I try to make a call over Speaker or trying to use Siri, the michophone doesn’t work. What can I do? An iPhone 6 has 2 microphones, the one in the bottom is used for normal voice calls, shazam etc… The other one is on the top next to the front camera (it is one assembly with the camera, sensors and earspeaker cable)....
Chosen Solution I installed a new ram and hard drive but it will just blue screen when ever it boots and gives me kernel security failure error code so I can’t seem to fix it? @sdhd …sounds like it doesnt like the new memory or it needs to be reset. have you ensured you are using the correct ram and they are paired correctly? have you tried using the old hard drive and new ram or old ram and new drive to see which is the cause?...
Chosen Solution I have a black dot on my TV is a vizio can you tell me what going on with my my tv It also have Some white box on the TV it’s a 90 inch Visio TV Does the problem persist regardless of the image on the tv? If so it sounds like you are experiencing some dead pixels which are unfortunately not repairable. I would recommend contacting the manufacturer about a warranty as this does sound like a defect....
Chosen Solution Hello, I’m replaced Iphone 6S Screen but ı lost proximity sensor’s silicone. What should I do? The black rubber mesh is actually for the auto brightness sensor. Without it the brightness sensor will be less sensitive to light (to darken screen) but still work. The other part that goes around the proximity sensor is a transparent plastic piece. That’ll help with the sensitivity and alignment of the black plastic proximity sensor on the FCAM flex....
Chosen Solution Hello, I’m installing OS -X Lion on my 13” MacBook Pro, but it stuck at “downloading additional components” and it says 46 hours left. It’s already more then 7 hours that I’m waiting and I don’t think it s normal. There is also the little circle running since yesterday night … what should I do? Reinstall the OS again? thanks Often the issue is a poor internet connection so the installation fails....
Chosen Solution The screen turns on but only half of it displays. Is this repairable? Can I take it somewhere? Unfortunately enough the part is not available through here, but I did find a replacement for you on ebay. There is no official guide, but the teardownfor the nook looks simple enough if you are comfortable with doing the repair.
Chosen Solution It seems that whatever the barrel screws into has moved, if I open it up..is it an easy fix? I have a million little tools but none fit!! Hi, I don’t know if it is an easy fix but if your mixer is a Chef model A701 or A 701a here’s the service manual (be patient as it is a slow download) On p.3 it describes how to dismantle the Planet Hub and beater fixing assembly....
Chosen Solution So I recently moved and just set up my TV again, on the outside the TV looks perfect, no cracks or scratches, but when I turn it on the screen looks fractured with tons of colored lines. I can still see the menu and images ‘behind’ the cracks. So I’m trying to see if this can be repaired or if I’m screwed and have to buy a new TV....
Chosen Solution Hi, I run a small repair shop and have found that whenever I do an iPad repair, even with latex gloves on, i still manage to get marks on the screen - which is a massive downside for customers and has even cost me a new LCD before. I have got new LCD’s with these screen protectors on that dont leave any residue or marks and have protected the screen during repair....
Chosen Solution Okay. This is a long story. tldr: iPad restarting randomly and changed wallpapers after LCD/digitizer assembly replacement. This repair comes after first repair where purchased LCD assembly stopped working after being installed for weeks. No drops. I got an LCD/digitizer screen assembly from another company before I purchased one from iFixit. The screen was cracked on the original. I replaced the screen and reinstalled the home button. No problems, everything worked wonderfully for about 2 weeks....
Chosen Solution i did replaced screen on ipad pro 12.9 a 1652 but id touch didnt work i think im going to buy iPad Pro 12.9" LCD Screen and Digitizer Assembly from here do you think its can work on my ipad espcially id touch plz help Have you installed the screen all the way? Also, does the home button work just not the touch id function? More than likely you may have damaged the home button flex when transferring it over....
Chosen Solution i bought an iphone 5 and when i tried to connect it to my wifi network it says the password is incorrect( i know it s correct) i think it´s not my router because my ipad wifi work normally. i tried to reset network settings, reset the iphone and restoring it too but doesn´t worked. maybe changing wifi antenna would fix it? or it is a wifi module problem?...
Chosen Solution Hey guys, Back with an iPhone SE. Completely water logged, Had a short on VDD_MAIN. Removed that and now when the power button is pressed it takes around 100 mA and dies down. Doesn’t boot up, Seems like a dead CPU. But I maybe wrong so think anyone of y’all can help? Will be much appreciated… It shows the signs of being brain dead but it might not be a faulty CPU causing it....
Chosen Solution Just got an iPhone 3gs model A1303 from an old friend in school. She said it was water damaged and the screen was unresponsive. The screen is in fact unresponsive. I am attempting to restore the iPhone before I even attempt to replace the screen. Of course my hopes weren’t high considering there is water damage. I attempted to restore the iPhone two times so far and the first time it didn’t finish,, the second time it did, but resulted in a message saying the phone could not be restored, with “error 29” or “code 29” I don’t remember....
Chosen Solution I have a old iPod Classic 5th gen that my girlfriend had laying around. She told me she couldn’t get it to turn on. So I got a new battery and installed it. But still wouldn’t turn on. After a couple days I went back to it to give it a look over. Found a burnt SMD but I couldn’t identify it at all. Here it is all burnt up....
Chosen Solution I can’t find Xs earpiece speaker I would like to know if the X earpiece speaker compatible with iPhone Xs earpiece speaker. I have taken apart both iPhone X and iPhone XS and they both use different earpiece speakers as placement differs very slightly.
