Posts

Chosen Solution I have an iPad that’s stuck on the Apple logo. Start by connecting your iPad to its Power Adapter and allow the iPad to charge for at least an hour - or possibly overnight. This step is advised as a battery with very low charge, or is failing, may produce symptoms that emulate a boot loop. If the problem fails to stabilise, while still connected to the Power Adapter, attempt a forced restart of the iPad: Force restart iPad (models with Face ID or with Touch ID in the top button) If your iPad doesn’t have the Home button, do the following: Press and quickly release the volume button nearest to the top button....

Chosen Solution I bought the ifixit screw driver set I’m using the 0.8 star pentalope bit and the screws won’t come out Are you talking about the two screws at the bottom of the phone? If so then you need to use the P2 or P5 bit. this is purely dependent on whether you have the correct size screw driver or if the threading has gone in the screws. if its a case that the threading has gone you’ll need to create tension in the screen before using a magnet or a pentelope screwdriver to pull the screws out of place....

Chosen Solution I had someone ask me to repair a phone. She took it somewhere else in town to be fixed and afterwards the Home button as well as both front and rear camera have stopped working. My first inclination was that someone didn’t fully reconnect the cables, but that isn’t the case. I tried disconnecting and reconnecting all connectors, just to check and everything is still the same – No home button or cameras....

Chosen Solution I just replaced the screen on my iPhone 6s, wasn’t sure how you put the screen back on after finishing everything and it feels like it’s not in properly in some places? The screen also doesnt have a smooth taper to the body, making me feel I’ve not put it in correctly. The screen looks fine and the phone is functional other than that. There is actually a simple reason here you could’ve bought the wrong type of phone screen or you might’ve broken a clip(s) that hold the screen in place so check the phone if there are any broken clips....

Chosen Solution Whenever I plug my iPhone 4 into ANY charger (I’ve tried a lot) it either charges for about a minute (or not at all) and than a message pops up saying “this accessory may not be supported. Should I try to replace the battery? Maybe the port? I had this with “non Apple” chargers and to a lesser degree “non Apple” docking cables. I was suprised to find that of the 3 chargers and cables that I had gotten with some of my iphones on ebay, NONE of them were genuine Apple equipment....

Chosen Solution I was super excited to see the JC C2 in action but have realised it’s just for Apple devices, I have a customer’s damaged Samsung phone that is bootlooping and was wondering if there was a similar device I could get? no devices like jc for android unfortunately. what is it you would be trying to do with it if there was

Chosen Solution is there anyway to repair the charging port for a stylo 3 ? Hi Here’s a video that shows how to replace the charge port in the phone. You will need smd soldering expertise and some tools to carry out the repair. Replacement parts (supplier example only) are available online. Just search for LG Stylo 3 Charge port connector to get results for suppliers that suit you. If this seems too daunting, contact a reputable, professional mobile phone repair service and ask for a quote to repair the charge port....

Chosen Solution Seems to take over an hour to complete a normal wash on normal cycle. I have cleaned out the pump basket already but not sure if there is any other parts to clean out. It use to take only 40 min before now it seems to take longer & longer to complete washes. There are no error codes. Machine runs fine and washes cloths but just takes a long time....

Chosen Solution Looks like my Macbook Pro has crashed. System keeps restarting on its own with a white screen suggesting a Kernel Panic kind of situation ( please see pic attached for reference). I tried basic troubleshooting using Disk Utiltiy. There my internal hdd ( I have two 2 partitions of 250 GB each) with OSX installed appears to be greyed out. Repair disk gives the Error : “Disk Utility cant repair this disk....

Chosen Solution Hello, iFixers 👋 My friend has a Xiaomi Mi Game laptop (he says gen 2) that behaves strangely - mid section of the keyboard only works with caps lock engaged and is completely dysfunctional otherwise. We have disassembled the laptop and found that one of the traces of the left keyboard flex cable if slightly bent. This may be due to the fact that it is being pressed by a hard drive enclosure....

Chosen Solution I have a 17.3 touch screen. Razer laptop do you guys have replacement monitor. Please email me lacefield8@sbcglobal.net Hi! You can find one on eBay: https://www.ebay.com/itm/Genuine-Razer-B…

Chosen Solution So i ordered a battery for my Iphone and replaced the current battery in it. As far as doing the replacement it went very smoothly. When everything was put back together I started up the phone and there were vertical bars across the screen and there was nothing about the phone that was working at all. When I took the phone back apart, i read the battery writing and both the WHR and the APN didn’t match....

Chosen Solution So, I have a 75” Vizio, m75-c1. Great tv and picture. It was one product cycle before they released their HDR TVs. However, this tv has the same guts as later models that have hdr, except the processor. So, I’m wondering, with s different processor from a later model, would it be able to have HDR? My thinking is they could support it with an update on software, but why would they?...

Chosen Solution I am trying to replace a cracked screen on my 2017 iMac 21.5" 4K. The cracked screen worked perfectly—minus the crack. External displays from the Thunderbolt (miniDisplayPort) is working normally. The replacement display arrived, but it wouldn’t power on. After some testing, I figured out that the new display had some issue powering the backlight, or the new display had a bad backlight. I went back and forth between the new display and the cracked display several times....

Chosen Solution Hey guys, got a question from my other technician. He replaced the Digitizer on an iPad 4th Generation. Tested it and everything worked fine until the customer brought it home. Now apparently the device boot loops three times then starts up after the third try. The device when we gave it back to her was on iOS 7 7.1.2 so that was fully updated. She had called and I informed her that either backing up the device and doing a factory restore and then restoring it from that back up or updating the device to iOS 8 (8....

Chosen Solution Installing a new screen on the iPhone 6s and the home button connector is missing from the new screen? Are you certain it’s a 6s screen and not a 6 screen that you ordered? Either way you should be able to exchange it.

Chosen Solution I made a stupid mistake ‘cause I FELL my iPhone after I drunk. Guess what? My phone screen got shattered, what should I do? First of all check that the phone itself still works, a popular method is to plug it in to a computer and listen for any tones, or call it from another phone. If it still works then all that is needed is a screen replacement....

Chosen Solution but i dont have a itunes aint working is there any other way please tell me another way tierran, not sure why you don’t just download iTunes. It would make things so much easier. Here is what you can try:" 1.download iphone browser from here! 2.install iphone browser 3.connect iPod to computer 4.open your iphone bowser and navigate to var folder 5.open var folder and navigate to keychains 6....

Chosen Solution I have a 4th generation 20gb iPod (mono) that is displaying the folder error icon. So I have replaced the logic board. I have also replaced the original drive with a iFlash-ATA1 adapter and a Samsung 128gb SD. After all that, the iPod still displays the folder error and my computer does not see the iPod when it is connected. Any ideas about what I should/can do next? Thanks...

Chosen Solution After replacing the battery in my ipod 5th generation 60gb my ipod was not coming off hold. I bought a replacement hold switch on eBay and after replacing this the ipod is still stuck on hold. Could this be the logic board? Hugo, the way I would proceed is by checking the flex first. Make sure it is properly seated and locked. Then check the switch on the flex itself, check to make sure that the switch is properly engaged between the two tabs of the slider....