Chosen Solution Hello, I have a 2018 Asus FX504G with a GTX 1050 and a 8th gen i5 with 256GB m.4. I have a problem where my laptop won’t turn on after I had hit it. When I hit the power button, the only thing that comes on is the charging light(if charging) and the battery looking symbol, it just stays on. I’ve tried all of the restarting tricks with CMOS with no resolve....
Chosen Solution I need a replacement handset ear piece speaker and it looks like there are 2 pieces for a motorola one 5g ace (xt2113) Hi @turtle62 Seems you’re right. It appears that there are two part numbers for the earpiece receiver for the XT2113 model, SR78C86690 and SR78C87845 and they both look the same. Search online using the part number only to find suppliers that suit you best.
Chosen Solution I received a used RCA VOYAGER III TABLET how can I bypass the google account Check out the video below, it is for bypassing FRP/Google account lock on a RCA Voyager but it should work on the Voyager Pro. https://www.youtube.com/watch?v=vJ2m1tEP… Well in 2020 there rlly isn’t way anymore google got smart therefore u connect to WiFi on, rca laptop it auto updates then u rlly can’t do much. But ig once I get to sign in just type anything then double tap or click on it and click assist it should take u to google ....
Chosen Solution ice is forming on coils in freezer and repair man just uses a blow dryer to take the ice away but doesn’t fix the problem. what can I do. I can only offer some advice. My grandmother would always take all her food out once year unplug, the frezer and let it sit for a couple days or so, then replug and statrt over the next year or so
Chosen Solution I installed a light kit on my 2015 Club Car Precedent 48 volt. I installed a 48v to 12v reducer for the light kit. The lights work. But now there seems to be no power to drive. I mean nothing happens at all. No beep in reverse it’s like something is not getting electric. It worked before the light installation and Now does not work after the installation. I’m not sure what could have happened....
Chosen Solution Hi. Got a customer that changed the screen on his iPad by him self. The replacement went approximately ok, but the iPad keeps restarting every 2 minutes and 30 seconds. He told me that he did not separate the logic board from the battery connector when he disconnected the old screen and connected the new screen… When he connects the old screen again, the iPad do not restart every 2 min… It´s an original screen....
Chosen Solution My iPhones’ front camera is not working. Ordered a new sensor unit and just plugged that in instead of the original one without installing it (earpiece connect etc.) but the camera still refuses to work. Already tried to unplug the back camera. What can cause the issue? Is the logic board dead? Thanks for answering! After the flex replacement all as same that there might be the problems in connector or other component near connector damage or open....
Chosen Solution Hello! I just repaired an iPhone 8 battery. Once I put the screen back on, the home button wasn’t working. It vibrates when I touch it and Touch ID works. I have not finished battery calibration. I checked the flex cables and they’re all clean and I did not nick a cable when opening the phone. What could be wrong? Thank you for the help. Try reconnecting the cables again and make sure that the connections are clean
Chosen Solution So my iphone broke. I wanted to try and restore it since there wasnt any data on it. However when put my phone in DFU mode and start restoring my iphone via Itunes it stays stuck in “Waiting for iPhone” and the apple logo shows once on the phone. Does your phone charge when plug into a wallcharger and hold its power when disconnected from charger?
Chosen Solution I have an iphone 6s which works pretty well. Recently I have had a problem with receiver/speaker - it seems to work well when I call some people .. but for my friend for example I can barely hear him, even when I plug my headphones on. His phone is working perfectly fine and he has no problems hearing me. What could I do to fix it? I’ve tried everything....
Chosen Solution I bought a screen for iPhone X from ifixit.com. Yesterday I got it replaced professionally however the sensor on the screen is not working. Please help me. Sensor issues can be caused by a number of mistakes and misalignments. I recommend taking the iPhone back to the professional who replaced your screen so see if they can correct the issue. If there is no way to fix the sensors, you should install the original damaged screen and take it to apple for a screen replacement....
Chosen Solution Recently changed the screen on the iPhone XR. Everything went perfect and switched over the original camera/sensors. Face ID is working and everything else is as well. Only issue is the screen will light up and then go back off randomly without receiving notifications or picking up on a face. Any suggestions? I would try replacing the sleep/wake button or try cleaning the connector on the board.
Chosen Solution my ipod classic 5 gen wont show up on my computer or itunes all it does is charge what can i do? i put it disk mode but then i hook it up but it stays at the check mark gago1622, have you tried to check the diagnostics and see what it does? I just finished a repair with the same error and it ended up being the logic board....
Chosen Solution Hi, I dumped my iPod nano in water a long time ago and fixed it with some rubbing alcohol. The backlight however is damaged from the water, but it just looks like some water deposits that can be cleaned. Is there any way to disassemble the backlight to clean the film? Thanks. Nicholas Skupien no you cannot separate it (at least not by conventional means). I’d either learn to live with it or replace the complete display assembly....
Chosen Solution so it goes way back 3 months ago , i woke up one day to see my phone covered in sweetened tea , i immediately clicked on the power button to see if it was working , fortunately it turned on and i thought that since it’s working , then there shouldn’t be any internal damage to the phone components ,so i quickly dry it with a sheet and plug it to the charger next to me , after like 5 mins it went into a boot loop and wouldn’t stop , so i took it off the charger then put it in a bag of uncooked rice for 3 days ....
Chosen Solution I have a MacBook Pro mid 2015 Retina 15" and some months ago realized it’s battery must have been swelling after reading cases on this site. I thought that my external device cable connectors were somehow blocking the screen from closing properly. What a nut? So I instinctively, instead of always keeping it running and just putting it to sleep at night, when I do the same, I started 3 months ago to power down nightly....
Chosen Solution Hi, in an attempt to solve a problem with the on/off button I tried to disconnect the battery from the board, but it looks like something went really wrong. A technician told me I can just throw my phone in the bin. Do someone in the iFixit network have any suggestion to still save my phone? Here a detailed photo: Its done. You tore off the traces so there is no fixing it, sorry....
Chosen Solution Can it be upgraded?If yes, what is the M.2 slot size? 2230? Yes, the SSD in the Dell XPS 13 Plus is user upgradeable. The slot in your machine is an M.2 2230 or 2280 drive with a PCIe Gen 3x4 or PCIe Gen4x4 NVME interface. Source
Chosen Solution I accidentally spilled toothpaste on my dsi xl about 6 months ago but i started needing it more so i thought i would ask if there is a way to fix it without paying for anything like a new hard drive or something like that. Anyone know the answer Also the screws got rusted or stripped somehow it only happened to the three by the slot 1 card reader....
Chosen Solution The grey area is “crusty" and kinda chips or flakes off when I scratch it. Is this board junk? It looks like it has corrosion on it. Disconnect the power and get a qtip and some rubbing alcohol and clean all of the stuff off. Wait for it to dry and test it.
