Posts

Chosen Solution hi everyone my problem its that all the keys from the (Q to the P) sometimes stop working, i have to press these keys several times for them to work (sometimes this doesn’t work) or change the angle of the Mac. If I move the mac much they stop working again it’s impossible to write i depend of the dictate(all the other keys work perfectly). please help!!!!!!!!!! I do not find a keyboard replacement for this model....

Chosen Solution I have a Samsung notebook model NP530E5M-X02US. I need to know how to take the back off it so i can replace the cmos battery plus since i will have it open I want to replace the battery too. I need guidence on taking it apart and part number for battery . Would you please help? It has windows 10 and intel i5- 7200u CPU 8.00GB Ram pen and touch screen If it helps Serial number is 0QGR91JJ104767...

Chosen Solution To turn on my Macbook Pro I have to disconnect/reconnect battery and attach magsafe charge cable before powering on. Once it powers on I can disconnect magsafe and it holds charge fine. but once I turn it off it will not turn back on with or without the magsafe attached. I then have to repeat the above procedure to turn on every single time. Help! This symptom is post replacing screen and keyboard as well as applying fresh thermal paste....

Chosen Solution so a year ago I dropped my cracked phone in the bath I though it wasn’t going to work so I just left it and I thought I would give it another go of charging and It made the charged noise and I started to play with the screen it makes the noises but the screen is completely black so I don’t know what to do. could be a bad screen or something on the backlight circuit is damaged...

Chosen Solution This exact thing happened to my samsung tv. it just ahut off no red light or anything. I unplugged it and pressed power button for 30 seconds. now when i plug it in the red light comes on but tv will not turn on.u Minor storm at the time of incident. Please advise. @nickyyy we would need to know what the exact model of your TV is. right now it does sound like either a bad power board or bad main board....

Chosen Solution hello i replaced my apple watch series 3 screen and now the screen will not light up its blank but when i charge it its on because i hear the charging sound i dont know what to do please help Did your old screen work before repair or was it blacked out? If it worked, try your old screen. If your old screen works, then double check that all the connectors are seated properly....

Chosen Solution Hi. My Hp Pavilion (with Windows 10) turned off all of a sudden by itself (probably because of high CPU temperature) and when I turned it on I got the message “Not connected-No connections available”. I don’t think that the problem is due to the router or the drivers as the PC was working perfectly and then turned it oof by itself, as I said before. What I tried so far: I clicked the Reset Network option and restarted the PC but the problem still persists....

Chosen Solution In reference to iFixit’s own Portable Anti-static Mat which can be purchased directly through iFixit store….. Is this mat heat resistant as I will need to be soldering and reflowing components. ……..Alternatively.. the special phone repair mats (NOT iFixit branded(see picture attached)) that are supplied with the sections for placing components (these are identified as ESD but not supplied with a grounding socket…. Are these ESD safe or falsely advertised....

Chosen Solution Bullets wont load in 30 bullet barrel . Brand new infinus for xmas . Looks like black piece inside barrel fitted wrong way round, smooth side against bullet grooves , bumpy side against smooth battel wall . Just jams after couple bullets put in . You should get the alphahawk.

Chosen Solution Hi, I decided to replace my screen after it broke but now when it turned on only a side of the screen responds to touch while the other parts of the screen don’t . Open it back up and make sure the connectors are firmly in place and the flex cable wasn’t bent or torn. If those check out then you’ve got a defective part.

Chosen Solution Hi, recently I changed the rear camera of the iPhone 5. The camera was not working so thats why. But after replacement the phone says No Service, but the phone was receiving signal fine before replacement. I have no idea what caused it. I also tried to replace the entire bottom part because I thought it would be that wire which connect to the logic board is damaged but that did not worked as well....

Chosen Solution Hi. I have an iPhone 5s that keeps shutting down randomly, several times a day. I have tried 2 new different batteries. But same problem. When plugged in charger it starts again with a lot of remaining battery. When replaced battery i did the battery calibration. Draining the phone to 0 %, charge to 100 % and force restart. Any ideas what this is. I replaced the battery in the first place because i started have the problem with it shutting down a 30-40 % power....

Chosen Solution Hi! I recently received a used iPhone 6S as a gift, but a couple months after receiving it it just stopped working. It will not turn on and won’t even charge. I would like to try to service it myself but am not sure where to start. I suspect it may just be the battery, but would like some confirmation before I go ahead and buy the parts to replace battery....

Chosen Solution Iphone 8 plus rear glass replaceable or not? and a tutorial please It can be replaced, but it isn’t as easy as most phones and will require a lot of patience if you don’t want glass getting lodged in your fingers. you will have to fully disassemble the phone and remove the wireless charging pad before breaking the glass and starting the removal process. Please follow the above guide that was linked to complete the process....

Chosen Solution Hello, I have been following posts about how to fix water damaged iPhones on this website. My phone got wet under a running water. When I took it out, it was still on but after 3 mins it turned off and would not turn on. I put it in rice and after almost a week it turned on. But my phone screen was glitching. I managed to still use it lightly for testing purposes but then after some time it turned off again and i couldnt turn it on....

Chosen Solution My iPhone’s screen in separating on the top, it moves whenever I tap the screen. Could this be due to battery swelling (I read it’s a problem on the iPhone 5, but also SE?) or has the screen come loose somehow? The screen itself works fine, no other problems there. What could cause this and how can I figure it out? It’s a problem with the batteries swelling and causing the screen to push out....

Chosen Solution Ok guys, have to change out the rear camera whole lens assy. How do I do that? Changing out just the lens is not an option. I think I need to pull out the bracket that holds the rear cameras but not really seeing a way to accomplish that. Plus I already have to change the power button, flash, and prox sensor cable so I’m already in the area, have the cameras out but cannot see how that bracket comes out....

Chosen Solution Just to be sure. If I order the replacement screen from ifixit and follow the guide, I will only lose the True Tone function? And the message will quiet down after some time? Everything else will work as normal? Although the messages will stick around, the true-tone function can be restored with a JC Pro 1000s or similar tool.

Chosen Solution When I join a party or game chat they cant hear me speaking but I can hear them. it is probably something 2 do with ur mic not the xbox It could be a multitude of things. A: your headset mic is bad B: the 3.5mm jack on your xbox controller is not working properly.

Chosen Solution I was attemtping to remove the iSight cable out of a 2011 MacBook Pro 17 to remove my broken LCD, but accidentially snapped off the connector from the logic board all together. Not sure if they have parts available that could be soldered back, or the difficulty involved. Trying to determine if it’s worth it just to swap in a new logic board, if the cable functions expand past only operating the iSight camera....