Posts

Chosen Solution I have got two MagSafe2 adapters from my old MacBookProRetina. Is it any way to remake it to use with new MacBookProTouchBar with usb-c? Sorry just not possible! The older MagSafe chargers are really a dumb device the controlling logic was within your MacBook system. The USB-C charger is a smart charger where over the USB connection the charger and MacBook Pro talk to each other. So the charger knows what to do from what the MacBook Pro tells it....

Chosen Solution It gives me a read error when I insert a CD into the laptop Try the CD on a different device and try another CD in the drive. If the CD works on another device the issue is likely your drive. If a different CD works in your computer than the other CD is faulty.

Chosen Solution Hi All, Thanks for reading this thread. i want to know if somebody here ever have same keyboard input problem with Samsung NP355E (LA-8868P) like me, Its started when the LED *break and replaced with standard 14.0 LED (but the part number is different from the genuine ones). The Laptop display after LED replacement was OK, nothing to concern about. But suddenly the keyboard input went randomly error which in now its getting worse by not working at all....

Chosen Solution Hi, My Jawbone Jambox fell and where you plug in the power adapter is broken and I cannot recharge the battery. I am planning to take it apart and replace the broken part. Does anyone know where I can look to buy the adapter for charging it? Thanks! Scot M, here is a decent video about how to do it. Looks like a standard micro USB connector. Somewhere it says that it is the same as Sony Ericsson U5i phone....

Chosen Solution Neen motor for 2012 Mr Christmas SUNTRONICS COMPONENTS http://www.mcssl.com/store/suntronicscom… Mr Christmas Royal Marquee Carousel-Item# 7917 or Sku# H18980 http://www.ebay.com/itm/Mr-Christmas-Roy…

Chosen Solution I replaced my macbook air screen because it had a cracked LCD. I replaced the entire display using an ifixit guide, but now when I try to turn on my laptop, I hear it waking up when I have it plugged in and I try pressing the power button, but the screen is black and stays black. How do I know if I made a mistake with the logic board, or with assembly in general, or if my replacement display is faulty?...

Chosen Solution the device had stopped working and i need a new firmware so that i can put it on it Hi Ahmed, it looks like the xtouch site has just the firmware you need.

Chosen Solution my iphone’s 4 rev A pulled out socket is it possible to fix it in my own? It is possible with some microsoldering action. If your are skilled enough, you could try resoldering it onto the board. Considering how small the connector is, this would be a very difficult job.

Chosen Solution I connect my Thunderbolt display to my iMac, unfortunately, I can’t get it to work. I was spend all my night for that, can anyone help me? According to the information I got, this is a firmware/software problem. When I check thunderbolt status at “System Information > Thunderbolt” section I only saw “No hardware was found. “ message. I downloaded ThunderboltDisplayFWUpdate1.2, it says “Your computer does not need this update....

Chosen Solution It had a damaged 30-pin display connector (torn off by previous owner) on the logic board & also some minor damage to the 30 pin ribbon cable. I bought a replacement connector and ribbon cable from eBay, just to be sure it would connect properly. Numbers listed on eBay for the ribbon cable: Part Number: 593-1006 922-9132 MPN: Y593-1006 922-9132 I reassembled the machine, but it would not boot at all....

Chosen Solution Will not load from any source.eth,hdd,odd,sub. Keeps saying insert boot device press any key or restart and choose boot device! Can’t remember bios master and will mother me choose restore default brian hunt you must get into the BIOS to change the boot order for your device. This “insert boot device " usually means it cannot read your HDD where the OS is stored. If you do not have the password, you can check on here and see if that applies to your computer....

Chosen Solution Hello my late 2015 iMac just died last week , took it apart and no lights on the logic board , I changed the power supply but nothing . Anyways , I took the 2tb fusion drive out of it and Since I have an extra 2008 iMac , I was wondering if I can just replace and plug the fusion drive inside the 2008 iMac (after taking it apart) and will it boot normally?...

Chosen Solution Does the IPhone 5c have the same WiFi antenna as the iPhone 5s? I too have the same question.I want to include that if any consequences faced regarding the gps signal error,accuracy,connectivity and any other issues consult with the most reliable garmin map updates free download 2019 for the ultimate solution.

Chosen Solution HI my iphone 7 plus fell down and now its on endless boot loop. if i restore by itunes there is 4013 error. i tried to use 3utool using ios 12 firmware and succefully reached 80% but it got stucked on updating base band .by the way on 11.4.1 it only reach 19% and stuck on device restore. everyone told me it cant be fixed there is no warranty an y suggestions?...

Chosen Solution Hi, I as doing a battery replacement on my iPhone X. After installing the battery i connected the LCD and Digitizer to test and found it turns on. I then disconnected the screen again to install a new one. After installing the front microphone etc on the new screen and reattached everything back to the logic board in order to test and found that it would not turn on....

Chosen Solution Do u repair other smart watch like iqi i3 And if will fix it then where can I find a ifixit service care I also have problem with my IQI smartwatch (but i8) and I aslo want to know where can I send it for reparation. Ifixit team, please help us!

Chosen Solution Can I hook 3 4 ohm 12-inch Subs to Alpine M200 repair monoblock amp and make it one on capable but wiring the speakers in series without blowing the amp At one ohm, the amp will most likely see it as a short and either lock down the amp or blow the amp. Don’t do it.

Chosen Solution Is it possible to replace the charging port of my phone since I have problems charging my phone. It has problems with some USB-C cables and I have to tuck them in a very special way, also fast charging doesn’t work anymore. Where can I find replacement parts (and maybe a guide)?

Chosen Solution Ps4 shows no sign of life no beep no light tried different cords and sockets no power at all The problem is likely the power supply itself and not the power cord. Locate and replace the power supply and update this with the results. Dan

Chosen Solution Just bought the rca 10 viking pro tablet. I changed he so sleep settings to never sleep. But it sleeps every 10 seconds of inactivity. I’ve tried every setting still no change. Can not figure out how to stop it from going to sleep Hmm. That’s definitely odd that a sleep setting would not work. Try finding an app that forces the screen to stay on. Like an app that intentionally runs in the background and keeps the tablet on....