Posts

Chosen Solution Well after successfully Replacing my IPhone 4 screen everything worked out successful except the loudspeaker is near mute. You literally have to place the phone in your ear to hear the faintest of sounds. I first suspected either a bad Connection or a fried loudspeaker. Unfortunately it’s neither since I have another logic board I swapped them out and the sound worked perfectly thru the loudspeaker. I’ve tried- -Tested Another logic board on the speakers & sound worked so it’s not the speakers....

Chosen Solution I have had my iPhone 4 for over a year now, and suddenly the screen of my iPhone 4 GSM started to go almost totally dark if I set the brightness level higher than around 3/4 of the bar. The touch screens keeps working, I hear the sounds of locking or unlocking it, I can enter the apps, etc. If I press the sleep/wake button I see a flash of the lockscreen but it goes dark in a second....

Chosen Solution Hi! My iphone 4s was left outdoors while raining, and has lost power when I found it. After charging it works at beginning, only with problem with the Home button. However a few hours later the screen cannot be turned on. I open it up and found no sight of water inside. It can still be recognized and get its iOS restored by itune, however its screen remains completely black....

Chosen Solution Greetings, I have an iPhone 5s running iOS 10.3.3. Sometimes it was randomly restarting and the fingerprint sensor didn’t work. Then one day it refused to boot, it just keeps displaying “connect to iTunes” I then decided to update the OS to 11.2.5 after many error, mostly error 21 and sometimes 9. Now the phone is updated to iOS 11.2.5 and the phone stills randomly restarting and sometimes fingerprint sensor doesn’t work....

Chosen Solution So my phone died and it showed it needed to be charged so I put it on the charger and it showed it was charging then I came to see if it was turned on and it wouldn’t show the charging sign or anything. My home button is broken and I don’t know what’s wrong I don’t have the warranty. Any ideas on what’s wrong with it or how to fix it?...

Chosen Solution Hey there! Just got an Iphone 6s in the mail that I thought just had a backlight problem. I popped a spare LCD on to see if that was the issue. It still wasn’t displaying a picture. It was sold to me as “responding to touch” but just not showing a picture. I haven’t been able to hook it up to itunes, make any sort of noise or anything....

Chosen Solution Hi, I am trying to reset my daughter iPod since it is disabled, but the iPod won’t go into DFU mode. I’ve tried connecting it to iTunes but it won’t read it. Just want to double check you’re following the right instructions: Connect the device to a computer using a USB cable.Hold down both the Home button and Lock button.After 8 seconds, release the Lock button while continuing to hold down the Home button....

Chosen Solution 7th gen nano isnt showing up in itunes. It says that the ipod has been detected but could not be properly identified. Here. Click on this link and it should help. I fixed mine with this link. http://www.apple.com/support/ipodnano/as…

Chosen Solution put the CPU of New Nintendo 3DS(804MHz quad-core + 134MHz single-core processing chipset) in a Nintendo 2DS(268MHz dual-core + 134MHz single-core processor)? To make an upgrade in the oldest shell.. Juliana Fino sorry not going to work, different layout and design.

Chosen Solution Hello, I got a new MacBook Air last week. After unpacking it, I noticed that the front right foot did not rest completely on the table (I tried several surfaces). There was about two sheets of paper space. This caused the MacBook to wobble minimally. I applied some pressure to the corner, and the problem was solved. Yesterday, I had the MacBook with me in my backpack, and when I got home, the front right foot was again not completely on the table....

Chosen Solution I have a 95 Chevy g20 van- I know fuse box is near pedals inside van,is there another fuse box. My van drove fine yesterday,now today it doesn’t want to stay running without foot on the gas?? Mine has a breaker box mounted above the battery with 20 and 15 amp breakers in it, and a second fusebox in the back, but thats part of the conversion van package, not a GM thing....

Chosen Solution Is there another way to charge the device without having to use the DC port If the charger doesn’t charge the speaker, but you know the charger works, then it’d likely be something obstructing the speaking from receiving charge. If you’re unsure of your charger maybe another one is handy to double check. Alot of speakers that are mass produced are not soldered structurally sound enough for too much wear and tear....

Chosen Solution I am replacing the display IC from the original screen and scraped away the black layer of adhesive and what could have been the top layer of the chip. Is this still usable after reballing or is it damaged. Very new to this stuff. Thanks! Hi When removing chips you will get some minor defects It your case it looks ok as I can’t see any obvious bits of exposed copper or any chipped or dented bits of the chip If you want to you could apply a very very thin layer of solder mask where it has been removed (if you do make sure to not get it in the pads,if you do you can carefully scrape it off the pads)to help if you have any on hand I would put the chip on(after Reballing)and see if it works and if it doesn’t replace it with a new one as small chips like this aren’t expensive to replace:-) Hopefully this helps Any questions please ask Thanks:-)...

Chosen Solution Is This Safe To Plug Into an extension cord or power strip? Hi @bunnybunny Use the below link for a gauge. https://www.electricalsafetyfirst.org.uk… For safety , do not overload those. Typically for this type of device, it is not recommended to use any type of extension cord. If you must use one due to placement for safety, use one rated for the current required by the fireplace. This should be marked on a plate on the back....

Chosen Solution We have an ipod which hasn’t been used for years. I found some treasured photos on it which I would like to import to my Windows 10 pc. Unfortunately when I start the process in Photos»Import photos although the pc recognises a device it is asking me if it is connected (it is), switched on (it is), has photos (it does), is unlocked (no idea). And I can’t get further than that....

Chosen Solution Help getting screws that won’t turn so I can replace battery if you use a small metal card to ever so slightly pry up the screen you can get a bit of tension on the screws and they should come out, you can also place a small magnet while doing this to help get those screws out.

Chosen Solution I can’t hear my phone calls If you cant hear the ringer of the calls, that is there to tell you a call is coming in, this would be an issue with your loudspeaker not functioning, which can be caused by a few different things. your volume switch could be set to silent. The switch on the left above your volume controls, changes the volume from whatever it is set at, to silent....

Chosen Solution power button blinking but won’t turn on after I cleaned my fan. I have had the same issue and this is related to using the power button to go on standby or just closing laptop lid. Don’t do it. Power button is to tun the computer on only. You should choose sleep mode via the startup button if you want the computer on standby or sleep mode. I agree with Simone - I’d start by ensuring everything was properly reconnected after your cleaning....

Chosen Solution my microphone works and i can hear music and such but as soon as i call someone no sound. no ring tone, and when they answer no voice and they cant hear me. i tried using speaker but no help. i have a extra iphone 4 for parts just incase i need to replace something. what is a solution to this problem? This is the audio ic chip there is a fix but it might and might not work hope this helpshttps://m....

Chosen Solution Due to the leakage the efficiency of the vape is coming down due to this… iam from banglore if any one knows any service center let me know or if there’s anything I could do please let me know Check for worn or damaged O-rings Check your seal Check for cracks Don’t overfill